|
|
There are many forms of corrosion damage of invisible window screen @theft-proof window screenBasic Types of Anti-Corrosion of Anti-theft Window Screen There are many forms of corrosion and destruction of anti-theft window screens. The common basic types are as follows: 1. Intergranular corrosion The intergranular corrosion of anti-theft window screen is a kind of selective corrosion destruction, which is different from the general selective corrosion. The insufficient corrosion starts from the local external surface, but concentrates on the grain boundary of metal, so it is called intergranular corrosion. After this type of corrosion, sometimes it is not easy to detect from the appearance, but due to the damage of the grain boundary due to corrosion, the strength of the material is almost completely lost, and the metal sound can be lost in serious cases. In fact, each grain is nearly separated. After a little stress, it breaks along the grain boundary and even becomes powder. Therefore, intergranular corrosion is a kind of harmful corrosion damage. 2. Uniform corrosion In addition to the above crystalline corrosion, there is also a corrosion of anti-theft window screens destructive, that is, uniform corrosion, also known as continuous corrosion, or universal corrosion, or general corrosion. This corrosion occurs on the whole surface of the metal material and causes the section to decrease continuously. If the corroded part is a force component, the real addition increases gradually and finally reaches the fracture strength of the material and causes the fracture. In addition to the above two types of corrosion, there are other types of corrosion, such as pitting corrosion and stress corrosion. Corrosion destroys the anti-theft window screen very much. Therefore, if there is one of the above corrosion forms in a certain medium, it is considered that the steel is not corrosion-resistant in this medium. |


